Updated November 2026

To track workouts without an Apple Watch, you can use your phone’s built-in motion sensors and GPS, a free or paid training app, a chest heart rate strap, or a simple paper or spreadsheet log. This guide walks through each method, shows you what data to capture for speed and interval sessions, and helps you pick the setup that fits your running and budget.

Why You Might Skip the Apple Watch

Plenty of runners train well without a wrist-based device. Some already own a different watch, some want to keep their phone as the single source of truth, and others simply do not want another charging cable to manage. The good news is that the core data you need for speed work, which is distance, pace, split times, rest periods and effort, can be captured with tools you probably already have. The trade-off is mostly convenience: you may need to start an app by hand, check a screen mid-rep, or take a few more manual notes.

Shopping for one? See our guide: How to Track Gym Workouts on Apple Watch: 6 Best Watches Compared (2026).

Method 1: Use Your iPhone or Android Phone for GPS Tracking

Your phone has GPS, an accelerometer and, on most models, a barometer. Running apps use these to estimate route, distance and pace. For steady runs this works well. For intervals, it is worth knowing that GPS can lag on tight turns and on a track, where the signal may bounce between lanes, so split accuracy can drop by a few seconds per lap.

Setting Up Your Phone for Workouts

  1. Turn on location services for your running app and set them to “always” or “while using” during workouts.
  2. Enable high-accuracy GPS if your phone offers it. On iPhone this sits under Location Services and System Services.
  3. Place the phone in an armband or a waist belt so it stays upright and does not bounce against your hip.
  4. Do a short test walk or jog to confirm the app is picking up satellites before your session starts.

Choosing Lap or Auto-Split Settings

For interval work, set your app to lap manually at the start and end of each rep. Auto-lap at one kilometer or one mile will not match a 400-meter repeat. If your app supports custom intervals, enter your rep distance and recovery time so it cues you automatically.

Method 2: Use a Dedicated Running or Training App

Most of the work of tracking is handled by the app rather than the device. Many training apps let you build a structured workout with warm-up, work intervals, recovery intervals and cool-down, then run through it with audio cues. Look for these features when comparing options:

  • Custom interval builder with distance or time targets
  • Pace target alerts or audio cues
  • Split history showing each rep’s time
  • Export to a spreadsheet or training log
  • Works offline or without a constant data connection

If you are looking for a broader comparison, our guide to the iPhone App to Track Workouts: 5 Best Picks Compared (2026) covers several options in detail.

Method 3: Add a Chest Heart Rate Strap

If you want effort data without a wrist device, a chest strap is the classic choice. It reads heart rate more accurately than most optical sensors during hard intervals, when arm swing and sweat can throw off wrist readings. Many chest straps pair with phone apps over Bluetooth or ANT+. Manufacturers specify that you should moisten the electrode pads before wearing the strap for the best signal.

How to Use Heart Rate for Interval Sessions

  1. Warm up for 10 to 15 minutes and note your resting heart rate in the app.
  2. Set a target zone for work reps, usually near your threshold or VO2 max effort depending on the session.
  3. Track peak heart rate on each rep. A gradual drop in recovery heart rate between reps can signal fatigue.
  4. Review the session afterward and compare heart rate across weeks, not just single runs.

Method 4: Use a Footpod or Running Sensor

A footpod clips to your shoe and measures cadence and stride, which helps estimate pace when GPS is weak, such as on an indoor track or treadmill. Footpods are useful for speed work because they respond quickly to changes in pace. Calibrate yours on a measured distance for the most reliable numbers.

Method 5: Keep a Manual Workout Log

A paper notebook or a simple spreadsheet can be just as effective for interval training, particularly if you run on a track and time reps with a stopwatch. This method forces you to think about each session and makes trends easy to spot over months. The downside is that it takes time after each run and depends on accurate entry.

Columns to Include in Your Log

Column What to Record Why It Matters
Date and session type e.g., 6 x 400 m, tempo, long run Shows training patterns
Warm-up and cool-down Distance or minutes Confirms you did the full session
Rep splits Time for each work rep Reveals fading or consistency
Recovery time Rest between reps Controls the intensity of the set
Effort rating 1 to 10 scale Tracks how hard it felt
Weather and surface Temperature, wind, track or road Explains pace changes
Notes Sleep, soreness, fueling Helps spot recovery problems

Method 6: Use a Website or Spreadsheet Template

Browser-based tools and spreadsheet templates give you the flexibility of a log with formulas that calculate average pace, total volume and personal bests automatically. If you enjoy building your own system, our article on How to Track Workouts in Excel: 6 Best Templates Compared (2026) walks through options, and Websites to Track Workouts: 5 Best Picks Compared (2026) covers online alternatives.

Step-by-Step: Tracking a 6 x 400 Meter Interval Session

  1. Warm up for 15 minutes of easy jogging, then 4 strides of 20 seconds.
  2. Set your target. For example, run each 400 in 1:30, which is a 6:00 per mile pace equivalent on a track.
  3. Start the timer at the beginning of each rep, not after a walk to the start line.
  4. Record the split at the 400 mark. If you use a phone, lap manually at each cone or lane marker.
  5. Rest 90 seconds using a timer, then repeat.
  6. Cool down for 10 minutes and stop the recording.
  7. Log results within an hour while the numbers are fresh: all six splits, average, fastest and slowest, and an effort rating.

Common Mistakes When Tracking Without a Watch

  • Trusting GPS on the track. Track splits from GPS can be off. Use a track lane or a stopwatch as your reference.
  • Forgetting to start the recording. Build a habit of starting the app before your warm-up.
  • Logging only distance. Splits, rest and effort tell you far more about how a session went.
  • Changing settings mid-session. Pick your lap mode before you start.
  • Ignoring recovery data. If your heart rate stays high between reps or your splits fade fast, adjust the session.
  • Skipping calibration. Measure a known distance once to check your app or footpod.

Tips for Accurate, Consistent Tracking

  • Use the same phone placement and app settings every time so comparisons stay fair.
  • Run the same interval session on the same track once a month to measure real progress.
  • Export or back up your data weekly so a phone issue does not erase a training block.
  • Keep your phone charged and in airplane mode with GPS on to save battery.

A chest heart rate strap is the most useful addition if you want effort data without a wrist device, since it gives steadier readings during hard reps.

View on Amazon

A running armband keeps your phone steady and upright so GPS signal and lap button presses stay reliable during intervals.

View on Amazon

A footpod clips to your shoe and helps measure cadence and pace indoors or in weak GPS areas, which suits treadmill and indoor track sessions.

View on Amazon

A handheld stopwatch is a reliable backup for track intervals and lets you time reps without relying on satellite signal.

View on Amazon

FAQ

Can I track interval workouts with just my iPhone?

Yes. Use a running app with custom interval or lap settings and keep the phone in an armband. For track sessions, lap manually at each rep to get accurate splits.

Is phone GPS accurate enough for speed work?

It is good for distance and general pace, but it can drift on tight turns and track bends. For precise rep times, a stopwatch or a track lane count is more reliable.

Do I need a heart rate monitor?

No, but it helps if you want to manage effort. A chest strap is generally more accurate than optical sensors during hard intervals.

What is the best way to log workouts if I do not use an app?

A simple spreadsheet or notebook with columns for splits, recovery, effort and notes works well. Fill it in within an hour of training.

How do I track a treadmill interval workout without a watch?

Use the treadmill’s own display for pace and time, and take a screenshot or note the numbers after each rep. A footpod can also add cadence and pace data.

Can I track strength or gym workouts without an Apple Watch?

Yes. A notes app or a dedicated lifting log tracks sets, reps and weights. If you want time and heart rate, a phone app with a chest strap can record sessions.

Will my phone battery drain quickly during tracking?

GPS use does drain battery, especially in high-accuracy mode. Start with a full charge, close background apps and consider a portable battery for long sessions. Consult a professional if you have a heart condition before using heart rate targets for training.

Conclusion

You do not need an Apple Watch to track workouts well. A phone running a good training app, a chest strap for effort, a footpod for indoor pace, or a simple log can capture every number that matters for speed and interval work. Choose the setup that fits your training, practice it a few times, and review your data monthly to see real progress.

Miles Sinclair

About Miles Sinclair

Miles Sinclair is part of our editorial team and reviews and edits our speed & interval running guides, checking product details against manufacturer specifications and owner feedback.