Updated November 2026
Plyometric workouts for track are short, explosive drills that train your muscles and tendons to produce force quickly. Done correctly, they improve ground contact time, stride power and takeoff strength across sprints, hurdles, and jumps. This guide walks you through the principles, a six-drill menu, a sample session, and the mistakes that cause most runners to get less out of plyos than they should.
What Plyometrics Do for Track Athletes
Plyometrics use the stretch-shortening cycle: a muscle-tendon unit lengthens under load, stores elastic energy, and then shortens with force. Sprinting is a series of these cycles, with each foot contact lasting well under a tenth of a second at top speed. Training that cycle directly, with drills like bounds and hops, trains the same rapid force production you need on the track.
Shopping for one? See our guide: Top 4 Apps to Track Workouts and Weights: Our Picks Compared.
For middle-distance runners, plyos improve running economy and reduce the energy wasted on each stride. For jumpers and hurdlers, they raise the rate of force development at takeoff. Sprinters benefit most from the combination of speed and stiffness they develop.
Principles Before You Start
Plyometrics are demanding on the Achilles, calves, hamstrings and knees. Treat them as a skill to be built, not a conditioning finisher. Women's Weekly Workout Plan: 7 Best Journals and Planners to Track It (2026) goes further into this.
- Quality over quantity. Every rep should be fast and controlled. If the contacts get slow or the landings sloppy, stop the set.
- Full recovery between sets. Rest 45 to 90 seconds between short sets and up to 2 to 3 minutes for multi-jump drills.
- Low total ground contacts. Most sessions should land between 60 and 120 contacts, depending on the athlete’s experience.
- Progress slowly. Add complexity or height only after you can perform the current version cleanly for the full set.
- Warm up first. Do 10 to 15 minutes of easy jogging, dynamic mobility and two or three build-up strides before any jump work.
Plyometric Workout Basics for Track Athletes
Step 1: Assess your readiness
Before adding plyos, you should be able to squat or lunge with control, hold a single-leg balance for about 30 seconds on each leg, and run without pain in your shins or Achilles. If any of these are missing, build strength first with the weight room work covered in Weight Room Workouts for Track Sprinters: 4 Best Guides for Speed (2026).
Step 2: Choose the right intensity level
Plyometric drills fall into three intensity bands:
- Low (rhythm and reactive): pogo hops, ankle bounces, skipping. Ground contacts are brief and the height is small.
- Moderate (horizontal and linear): bounds, broad jump series, hurdle hops. These emphasize distance and stride mechanics.
- High (depth and maximal): depth jumps, box jumps, single-leg hops for height or distance.
Beginners should spend two to four weeks in the low band. Sprinters and jumpers can progress to moderate and high work in their build phases.
Step 3: Learn the six core drills
- Pogo hops: Stay on the balls of your feet, keep knees nearly straight, and bounce quickly with minimal ground time. Do 3 sets of 20 to 30 contacts.
- Straight-leg bounds: Take exaggerated, horizontal steps, driving the knee forward and landing on the ball of the foot. Do 3 sets of 6 to 8 bounds per leg over 20 to 30 meters.
- Alternating bounds: Mimic sprint mechanics with a powerful opposite-arm, opposite-leg rhythm. Do 3 sets of 6 to 10 steps over 20 to 30 meters.
- Standing broad jumps: Load the hips, swing the arms, and jump as far as possible, sticking the landing. Do 4 sets of 3 to 5 jumps with full rest.
- Hurdle hops: Hop over a row of low hurdles or cones spaced 0.8 to 1.0 meters apart, landing softly and immediately jumping again. Do 3 sets of 5 to 6 hurdles.
- Depth drops to vertical jump: Step off a low box (15 to 30 centimeters), land softly, and immediately jump as high as possible. Do 3 sets of 4 to 5 reps.
Step 4: Build a weekly schedule
Two sessions per week is enough for most track athletes. Place them at least 48 hours apart and not on the same day as hard sprint intervals or heavy lifting. A common pattern is a plyo session after an easy warm-up and before a light speed or technique day.
Sample Plyometric Session for Track
This example fits a sprinter in the build phase, roughly 70 to 90 contacts total.
| Drill | Sets x Reps | Rest | Focus |
|---|---|---|---|
| Pogo hops | 2 x 20 | 60 sec | Ankle stiffness, quick contact |
| Straight-leg bounds | 3 x 30 m | 90 sec | Hip drive, landing mechanics |
| Standing broad jumps | 3 x 3 | 2 min | Horizontal power |
| Hurdle hops | 3 x 5 | 90 sec | Reactive rhythm |
| Depth drops to vertical | 2 x 4 | 2 min | Reactive strength |
Finish with 10 minutes of easy cycling or walking and calf and hamstring stretching.
Plyometric Workout Progression Over Time
Weeks 1 to 4: Foundation
Use low-intensity drills only. Keep heights minimal and focus on rhythm and quiet landings. Total contacts should stay under 60 per session.
Weeks 5 to 8: Strength-speed
Add bounds, broad jumps and hurdle hops. Increase distance or height by small steps, and drop a set if form breaks down.
Weeks 9 and beyond: Power and peaking
Introduce depth drops and single-leg variations for experienced athletes. Reduce volume as important meets approach, keeping intensity high so you stay sharp.
Tools and Surfaces That Matter
Plyometric work is far safer on a forgiving surface. A rubberized track, a grass infield or a well-maintained turf field works well. Avoid concrete, asphalt and hard gym floors for repeated landings. Footwear should be a stable trainer with a firm heel counter; very worn shoes increase Achilles and shin stress. A set of low hurdles or cones and a sturdy box of 15 to 30 centimeters cover nearly every drill in this guide.
Common Mistakes
- Too much volume too soon. Jumping daily or doing 200 contacts in one session is a fast route to tendon injury.
- Landing stiff-legged or heavy-footed. Land softly on the balls of the feet, with knees slightly bent and hips flexed.
- Turning plyos into fatigue work. Once the speed drops, end the set. The goal is power, not conditioning.
- Skipping the warm-up. Cold tendons and muscles are the most common cause of avoidable strains.
- Ignoring recovery. Sleep, fueling and easy days matter as much as the drills themselves.
- Copying an elite athlete’s program. Volume and intensity should match your training age, not someone else’s.
If you have a history of Achilles, hamstring or knee problems, or any pain that persists beyond a day or two, consult a sports medicine professional or physical therapist before continuing.
Recommended gear
Most plyometric work needs only a track and a few basic items. The following supplies help with consistent, safe practice.
- Adjustable plyo box: Adjustable boxes let you progress from low depth drops to higher box work without buying several platforms. View on Amazon
- Agility hurdles: Lightweight, adjustable hurdles make hurdle hops and bound spacing simple to set up. View on Amazon
- Cone set with markers: Cones mark bound distances, broad jump landing zones and lane spacing. View on Amazon
Tips for Getting the Most From Plyos
- Film one set from the side every few weeks to check contact time and posture.
- Pair plyos with your sprint training on the same day only when the sprint work is light.
- Track total contacts in a notebook so you can see the weekly load.
- Keep a few easy days in each week to let tendons adapt.
- For a broader plan that links plyos to other speed work, see Track and Field Speed Workouts: 6 Sessions for Faster Splits.
FAQ
How often should track athletes do plyometric workouts?
Most athletes do two sessions per week, spaced at least 48 hours apart. Beginners may start with one session and build up gradually.
Are plyometrics safe for beginners?
They are safe when you start with low-intensity drills, use a soft surface, and progress slowly. Anyone with existing tendon or joint pain should check with a qualified professional first.
How many contacts should a plyometric session include?
A common range is 60 to 120 contacts per session for trained athletes, and fewer for beginners. Quality and full recovery matter more than total count.
Can plyometrics replace sprint training?
No. Plyos complement sprint work by improving force production, but sprinting itself is needed to develop maximal velocity mechanics.
What is the difference between plyometrics and bounding?
Bounding is one type of plyometric drill. Plyometrics is the broader category of explosive jump and hop training that includes bounds, hops, box work and throws.
Should I do plyometrics before or after running workouts?
Most coaches place plyos early in the session, after a warm-up and before speed or technique work, because they need full quality and freshness.
How long does it take to see results from plyometric training?
Many athletes notice improved rhythm and stiffness within three to four weeks. Measurable gains in jumps and sprint splits usually take eight to twelve weeks of consistent training.
Conclusion
Plyometric workouts for track develop the quick, stiff, powerful contacts that speed and jumping demand. Start with low-intensity drills, progress by height, distance and complexity, and keep total volume in check. Protect your tendons with proper warm-ups, soft surfaces and adequate recovery, and your sprint and jump results should follow.

