Updated November 2026
Workouts for throwers in track focus on building the explosive strength, rotational power and body control that shot put, discus, javelin and hammer demand. By the end of this guide you will know how to structure a weekly training plan, choose the right lifts and med ball throws for your event, and progress your loads without overloading your shoulders, elbows or lower back. The sessions below are written as a starting framework you can adjust to your level and your coach’s program.
Why Throwers Train Differently from Other Track Athletes
A thrower’s performance comes from transferring force from the ground, through the hips and trunk, and out through the implement in a very short window of time. Sprinters need speed and elasticity, distance runners need endurance, but throwers need a combination of maximal strength, rate of force development and coordination. That is why throwers’ workouts lean heavily on heavy lifts performed with intent, plus fast, low-rep work that trains the nervous system to produce force quickly.
Shopping for one? See our guide: Top 4 Apps to Track Workouts and Weights: Our Picks Compared.
Throwers also carry a higher risk of shoulder and lower-back overuse because of the volume of throwing and the forces involved. A good program balances the explosive work with posterior-chain strength, rotator cuff health and enough recovery to keep technique sharp.
Core Principles for Thrower Training
Prioritize Force Production Over Fatigue
Most sessions should start with your highest-intensity work while you are fresh. Heavy squats, cleans and med ball throws lose quality quickly when fatigued. Save conditioning and accessory work for the end of the session.
Match Training to the Event
Shot put and hammer emphasize a strong base and leg drive, so lower-body strength carries more weight. Discus and hammer rely heavily on rotational power and turns. Javelin depends on a long, fast approach and upper-body speed through the throwing arm, plus shoulder health. Adjust accessory work and med ball emphasis accordingly.
Progress Gradually and Track Everything
Record your loads, reps, and med ball distances each week. Increase total volume or load by small amounts, roughly 2 to 5 percent per week at most, and pull back during peak competition phases or when technique breaks down.
Weekly Structure for Track Throwers
Most throwers train three to four strength sessions per week during the off-season and two to three during competition season, with throwing practice on the remaining days. The table below shows a sample split. Adjust to your school or club schedule and check with your coach before making major changes.
| Day | Focus | Example Work |
|---|---|---|
| Monday | Max strength (lower body) | Back squat, Romanian deadlift, hip thrust |
| Tuesday | Throwing technique and med ball power | Event-specific throws, med ball rotational throws |
| Wednesday | Recovery or mobility | Easy bike, foam rolling, hip and thoracic mobility |
| Thursday | Olympic lifts and upper body | Power clean, push press, weighted pull-ups, rows |
| Friday | Speed and power | Short sprints, broad jumps, box jumps, med ball slams |
| Saturday | Event throws and accessory work | Full-effort throws, rotator cuff and core work |
| Sunday | Rest | Full recovery |
Strength Workouts for Throwers
Lower-Body Strength Session
Heavy lower-body lifting builds the base that every throw depends on. A typical off-season session might look like this:
- Back squat: 4 sets of 4 to 6 reps at a load you can lift with clean form, resting 2 to 3 minutes between sets.
- Romanian deadlift: 3 sets of 6 to 8 reps, focusing on a controlled lowering phase.
- Hip thrust: 3 sets of 8 to 10 reps, pausing briefly at the top.
- Standing calf raise: 3 sets of 10 to 12 reps.
Olympic Lift Session for Rate of Force Development
Cleans, snatches and their variations train the fast, whole-body extension that throwers need. If you are new to these lifts, work with a qualified coach to learn the technique before adding load.
- Power clean from the hang: 5 sets of 3 reps at moderate-to-heavy loads, keeping the bar close to the body.
- Push press: 4 sets of 3 to 5 reps.
- Weighted pull-up or lat pulldown: 3 sets of 6 to 8 reps.
- Single-arm dumbbell row: 3 sets of 8 to 10 reps per side.
Med Ball and Power Workouts
Medicine ball work is one of the most useful tools for throwers because it trains the same movement patterns with a load that is easy to adjust. Use a ball that lets you throw with full speed without losing position. Most coaches use balls in the range of 3 to 6 kilograms for power work, with heavier balls for strength-focused rotations.
Sample Med Ball Circuit
- Rotational scoop throw (to a wall or partner): 4 sets of 5 throws per side.
- Overhead backward throw: 4 sets of 5 throws, explosive from the hips.
- Chest pass: 3 sets of 6 throws.
- Seated or standing rotational throw: 3 sets of 6 throws per side.
Rest 60 to 90 seconds between sets. Keep every throw at full intent, and stop the set once speed drops noticeably.
Speed and Acceleration Work
Throwers benefit from short, explosive sprints and jumps that improve the ability to accelerate into and through the throw. Keep these sessions short and fresh.
- 10 to 20 meter sprints at maximal effort, 4 to 6 reps with full recovery.
- Standing broad jump: 3 sets of 3 jumps, measuring distance each time.
- Box jumps: 3 sets of 4 to 5 reps at a height you can land softly from.
- Bounding for distance: 3 to 4 sets of 6 to 8 strides on a grass or track surface.
Upper-Body Health and Accessory Work
Shoulder and elbow durability are often what limit a thrower’s season. Include the following two to three times per week:
- External rotation with a light band or cable: 3 sets of 12 to 15 reps per arm.
- Face pulls or band pull-aparts: 3 sets of 15 reps.
- Scapular push-ups: 2 sets of 10 reps.
- Wrist curls and reverse curls for forearm and grip strength: 2 to 3 sets of 12 to 15 reps.
Core training should emphasize anti-rotation and bracing, such as Pallof presses, dead bugs and planks, because these support the transfer of force through the trunk.
Recommended gear
Medicine balls in several weights are the most useful single tool for thrower-specific power work, since they let you train rotation and overhead throws with adjustable resistance. Look for a ball with a grippy surface so it stays controlled through fast throws.
Resistance bands are ideal for rotator cuff and scapular work during warm-ups and recovery days. A set with several tension levels lets you progress as your shoulder strength improves. View on Amazon
A sturdy weightlifting belt helps during heavy squats and cleans by supporting bracing when loads get high. It is most useful for experienced lifters working in the top of their strength range. View on Amazon
A set of bumper plates and a training bar gives you safe, durable equipment for Olympic lifts, since dropping the bar from overhead or the floor is part of the movement. View on Amazon
Tips for Getting the Most from Thrower Workouts
- Warm up thoroughly with dynamic movements and light throws before any heavy lifting.
- Keep at least one full rest day each week, and reduce volume during meet weeks.
- Use video from the side and rear to check your lifting and throwing positions.
- Log your med ball distances and lift numbers so you can see progress over months, not just days.
- Coordinate your strength plan with your throws coach so the two programs support each other.
Common Mistakes
- Lifting heavy without technique. Sloppy cleans and squats build bad habits that transfer into the throw. Drop the load before the form breaks down.
- Skipping upper-body health work. Throwers who only train the big lifts often develop shoulder pain. Rotator cuff work is not optional.
- Training max effort every day. Power and strength need recovery. Stack too many hard sessions and throws get slower, not faster.
- Using a med ball that is too heavy. Throws should stay fast. If the ball slows your arms or changes your posture, go lighter.
- Ignoring the lower back. Heavy rotational throwing loads the spine. Include posterior-chain strength and anti-rotation core work to protect it.
FAQ
How often should throwers do strength workouts?
Most throwers lift two to four times per week, depending on the season. Off-season training can include more sessions, while competition weeks usually call for fewer, lighter lifting days to protect freshness.
Do throwers need to do Olympic lifts?
Olympic lifts are valuable because they train fast triple extension and force production, but they are not strictly required. If you cannot perform them safely with coaching, use jump variations and med ball throws to get similar training effects.
What weight medicine ball should I use?
Many coaches use balls between about 3 and 6 kilograms for power work. Choose a weight that lets you throw at full speed with good posture. Heavier balls can be used for strength-focused rotational work, but speed should always stay high.
How do I know if my shoulder work is enough?
Regular rotator cuff and scapular exercises, two to three times per week, are a common starting point. If you feel persistent pain during throwing or lifting, stop the aggravating movement and consult a physical therapist or sports medicine professional.
Can sprinters and jumpers use the same workouts?
There is overlap, especially in speed, power and core work, but throwers need more upper-body and rotational strength. Adjust your med ball and accessory choices to your event.
How much weight should I add to my lifts each week?
Small, consistent increases work best. Many athletes add roughly 2 to 5 percent to their main lifts when they hit all prescribed reps with good form, and hold the load when they do not.
Should I train through soreness?
Mild muscle soreness is normal, but sharp joint pain, swelling or pain that changes your throwing mechanics is a signal to rest and seek advice from a qualified medical professional.
Conclusion
Effective workouts for throwers in track combine heavy strength work, Olympic-style power training, med ball throws, speed drills and shoulder health exercises, arranged across a weekly plan that protects recovery. Start with a manageable volume, track your loads and throws, and progress gradually. Work with your coach and, when pain appears, a qualified professional to keep your training both productive and safe.

